Positec 40V MaxLithium Service Manual download pdf (Page 9)

9

Cordless Li-Ion hedge trimmer EN

SYMBOLS

To reduce the risk of injury, user

must read instruction manual

Wear ear protection

Wear eye protection

Wear dust mask

Do not expose to rain

DANGER – Keep hands away from

blade

OPERATING INSTRUCTIONS

WARNING! Do not use the product

without attaching the guard and

front handle.

1. GUARD ASSEMBLY

Insert the Safety Guard (7) into the slot as

illustratedinFigA;makingsureitissecurely

attached.

Use two screws to ﬁx the guard securely.

2. FRONT HANDLE ASSEMBLY

The Front Handle (6) must be assembled

before use:

1) Take out the bolt from the Front Handle.

2) Attach the Front Handle to the housing.

Make sure the protruding marks on the

Front Handle ﬁt perfectly into the matching

indentation on the housing. (See Fig. B&C)

3) Insert the locking bolt into the handle and

fully tighten the bolt. (See Fig. D)

4) Check whether handle is ﬁrmly secured, if

not retighten the locking bolt.

3. BEFORE USING YOUR CORDLESS

HEDGE TRIMMER

WARNING! The charger and battery

pack are specially designed to work

together so do not attempt to use any other

devices. Never insert or allow metallic objects

into your charger or battery pack connections

because of an electrical failure and hazard will

occur.

NOTE: Your battery pack is UNCHARGED and

you must charge once before use.

The battery charger supplied is matched to the

Li-Ion battery installed in the machine. Do not

use another battery charger.

4. CHARGING YOUR BATTERY PACK

TheLi-Ion battery is protected against deep

discharging. When the battery is empty,

the machine is switched off by means of a

protective circuit.In a warm environment or

after heavy use, the battery pack may become

too hot to permit charging. Allow time for the

battery to cool down before recharging.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments